U.S.Robotics USR012249 programa download grátis

22 Mbps Wireless Access Point Firmware Update Note: It is critical that the AP is assigned an IP Address before you try to update the software and firmware.­ Since the update process uses TFTP,­ a valid network IP Address will be required.­ A static IP address is NOT required,­ but the device should have at least attained a DHCP address.­ If you load the new utility without updating the firmware,­ you may be prompted to update the firmware.­ However,­ should this occur,­ you must have a working and valid IP address on the AP.­ If you load the new firmware without updating the utility,­ you will not be able to access the AP.­ Print these instructions.­ Download the USR_­ap_­50g_­nml.­bin file located at the bottom of the page.­ It is strongly recommended that you write down your settings for your device before upgrading.­ Once the upgrade is complete,­ the device will be set to manufacturers default.­ If you have updated the AP Utility and scanned your network for available APs,­ you may be prompted to update your AP if the new utility detects old firmware.­ If so,­ select Browse to locate the latest firmware file and update accordingly.­ If you are using the old version of the AP Utility,­ Log into the AP,­ select the Tools page,­ and select Browse to locate the new firmware file,­ USR_­ap_­50g_­nml.­bin.­ Once located,­ click Update.­